r.tec CLOSE-FIT
DAS VORVERFORMTE PE ROHR FÜR CLOSE-FIT LINING
Seit über 25 Jahren wird die r.tec® Close-Fit Technologie (Fold-and-Form method) erfolgreich für Wasserleitungen eingesetzt.
In enger Zusammenarbeit mit führenden Kunststoffrohrherstellern hat NordiTube dieses System laufend weiterentwickelt.
Diese Close-Fit Lösung wird für die Sanierung von Trinkwasser-, Gas-, Industrie-, und Freispiegeldruckleitungen angewendet.
ALLGEMEINE BESCHREIBUNG
The r.tec® Close-Fit Liner is a seamless, sleeveless and factory-preformed PE-100 pipe.
The diameter and thickness are designed to allow full re-deforming and reaching a close fit position in the host pipe and that the minimum SDR is reached in the finally back formed Close Fit position.

DIE VORTEILE AUF EINEN BLICK
- Independent and fully structural solution
- SDR17 PN10 for pressure pipes
- SDR 26 and 32 for sewer pipes
- Individual length up to 800m (depending on DN) are possible.
- Close Fit – No annular gap
- Jointing technology and branch connections with electro fusion fittings possible
- Fast and cost effective solution
- DVGW – certified for potable water and gas
Close fit IM ÜBERBLICK
r.tec® CLOSE-FIT | |
---|---|
Anwendungs-bereich | DRUCK & FREISPIEGEL •Abwasser •Wasser •Gas •Industrie |
Nennweite | 150–400 mm |
Material | PE 100 |
Beschichtung | / |
Harz | / |
Klassifizierung gemäß ISO 11295 | A & B |